Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTION FOR ASSEMBLING
A
B
1. Open the valve cap by twisting counter-clockwise. Ensure the valve is
clear from debris, sand, or dirt before releasing.
2. Push valve button in and turn counter-clockwise 90 degrees so it pops up
and is in the "OUT" position.
3. Insert the pump hose and twist it 45 degree clockwise to lock in place.
Inflate until you reach the required pressure.
12PSI minimum (10PSI for center deck chamber)
for proper inflatable boards operation and
15PSI maximum (10PSI for center deck
chamber). Over inflation will void your warranty.
AND DISASSEMBLING
①
Pump Set Up And Inflation
Connect the pump hose to the
gauge housing and secure it tightly.
7
①
Tabla de contenido
