Service & Maintenance; Transport & Storage; Guarantee Conditions - Telesteps 61209-101 Manual Del Usuario

CLEANING
For safety and functionality reasons the platform, particularly the stiles and rungs, must always
be kept clean. Dirt, filings, paint spots, glue etc. must be wiped away before the platform is clo-
sed. Clean the platform using a rag and a small amount of solvent. If needed, when clean, the
telescopic tubes can be treated with silicon spray. Spray in the tube and wipe dry. The platform
must always be kept dry so that dust does not impair its functionality.
SERVICE & MAINTENANCE
Any service or repair work must always be carried out by an authorized service workshop,
which determines suitable action in each individual case. Please contact the producer or
distributor for service & maintenance.
If rubber feet or end-caps are getting worn, replace these for optimal safety. Never use the
platform without rubber feet (slip protection) and end-caps to prevent dust, metal chips or
similar from getting into the tubes. New feet/end caps can be obtained from retailers. Only
original spare parts may be used for safety reasons.
In case of service or repair contact your retailer to find the location of your nearest authorized
service partner.
TRANSPORT & STORAGE
Always carry and transport the platform completely closed and compacted to protect the teles-
copic tubes from any damage that can impair the functionality of the platform.
The ladder shall be stored:
• Away from areas where its condition could deteriorate more rapidly (e.g. dampness,
excessive heat, exposed to the elements)
• Where it cannot be damaged by vehicles, heavy objects, or contaminants.
• Where it cannot cause a trip hazard or an obstruction.
• Where it cannot be easily used for criminal purposes.
• Permanently positioned (e.g. scaffolding), or/and secured against unauthorized climbing
(e.g. by children)

GUARANTEE CONDITIONS

The manufacturer guarantees that the product is free from material or manufacturing faults. If
material or manufacturing faults, or damage due to material or manufacturing faults, can be pro-
ven, the buyer is entitled to have the product repaired or replaced in accordance with the local
laws concerning sales of consumer goods in the country of purchase.
The manufacturer is responsible for faults in the product, for one year from the purchase date.
The manufacturer is not responsible for faults in the product, if it is clear that the fault is due to it:
• Not being used as described in the instructions.
• Not being cleaned, cared for, maintained, stored or transported in accordance with the instructions.
• Being rebuilt, modified or subjected to other external damage or accident unintentionally
being damaged by any object or substance.
• Being overloaded
• Being repaired by an unauthorized service partner or if non-original spare parts have been used.
• Being incorrectly set up.
Normal wear and tear are not considered as faults.
Proof of purchase must be presented for any guarantee claims. If the purchaser wishes to make
a claim regarding a fault, the retailer must be notified of the fault within a reasonable time after
the fault has been discovered, or within the time period regulated by the country of purchase.
UK