Setting Up The Tv With Your Pc - Samsung LN-S1951W Instrucciones Del Propietario

Setting up the TV with your PC

Plug & Play
Language : English
Time
V-Chip
Caption
Blue Screen : Off
PC
Move Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
Coarse
Fine
Move Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
Adjust Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
Setup
Return
Image Lock:
PC
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse)
and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
1. Press the SOURCE button to select PC mode.
Return
2. Press the MENU button to display the menu.
Image Lock
Press the
800
3. Press the
0
4. Press the ENTER
5. Press the
6. Press the
Return
picture may be blurry. Press the ENTER
7. Press the EXIT button to exit.
Position:
PC
Adjust the PC's screen positioning if it does not fit the TV screen.
1. Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Press the
3. Press the
Return
Position 4. Press the
5. Press the
Press the
Press the ENTER
6. Press the EXIT button to exit.
Return
Image Reset:
PC
You can replace all image settings with the factory default values.
1. Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Press the
3. Press the
Return
4. Press the
5. Press the EXIT button to exit.
Auto Adjustment:
PC
Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal.
The fine, coarse and position values are adjusted automatically.
1. Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Press the
Return
3. Press the
4. Press the
5. Press the EXIT button to exit.
or button to select "Setup", then press the ENTER
or button to select "PC", then press the ENTER
button to select "Image Lock".
or button to select "Coarse" or "Fine", then press the ENTER
or button to adjust the screen quality, vertical stripes may appear or the
or button to select "Setup", then press the ENTER
or button to select "PC", then press the ENTER
or button to select "Position", then press the ENTER
or button to adjust the V-Position (Vertical-Position).
or button to adjust the H-Position (Horizontal-Position).
button.
or button to select "Setup", then press the ENTER
or button to select "PC", then press the ENTER
or button to select "Image Reset", then press the ENTER
or button to select "Setup", then press the ENTER
or button to select "PC", then press the ENTER
or button to select "Auto Adjustment", then press the ENTER
English-23
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.