Braven 710 Guia De Inicio Rapido página 6

PAIRING TWO TOGETHER –
2
WIRELESS STEREO-PAIRING
Want even bigger sound? If you have two BRAVEN
710 units (yeah, you should probably get two), you can
pair them together for left and right stereo using "True
Wireless" technology. Here's how you do it:
First be sure to disconnect all Bluetooth® connections
(if any) on your device and remove any previously paired
BRAVEN 710 speakers from your device.
Next, press and hold the battery check button on both
BRAVEN speakers for 5 seconds until you hear a sonar
sound from both speakers. Within 30 seconds, a second
beep will indicate a True Wireless connection between
the BRAVEN 710 speakers.
Now that the speakers are talking to one another, you
need to get them talking to your device,
follow the steps in section 1 to pair your
device with one (not both) of your BRAVEN
710 units.
When you turn off either of the BRAVEN
710 speakers while connected in True
Wireless, both speakers will turn off.
When you're ready to rock again in True Wireless, press the
power button on both BRAVEN 710 speakers within 5 seconds
of each other. Wait approximately 15 seconds. The BRAVEN 710
speakers will automatically reconnect to each other and to the
previously connected device. You will hear two beeps indicating
True Wireless is reestablished.
Note: True Wireless technology only supports one active
Bluetooth® connection to your device at the same time. If
any other Bluetooth® device (other than the paired BRAVEN
710 speakers) is simultaneously connected to your device,
the BRAVEN 710 audio will distort. If distortion occurs, power