Tabla de contenido
d. Remount the spreader to the spread tank. Make sure that the spreader is locked in position.
Operate with caution to avoid injury caused by mechanical parts.
Specifications
Items
Compatible Aircraft*
Spreader Weight
Max Hopper Outlet Area
Compatible Material
Diameter
Spread Tank Volume
Spread Tank Internal Load
Spreading Range
* The firmware of the aircraft must be the correct version for supporting the Spreading System. Check the
release notes of the corresponding aircraft on the official DJI website.
The content is subject to change without prior notice.
Download the latest version from
http://www.dji.com/t20
AGRAS and
are trademarks of DJI.
Copyright © 2020 DJI All Rights Reserved.
Spreading System 1.0
Agras T16, T20
1.8 kg
8.6 cm
2
0.5 - 5 mm
20 L
Using with the T16: 16 kg
Using with the T20: 20 kg (note: the internal load of Japan version of T20 is 16 kg)
Varies according to material diameter, spinner disk rotating speed, hopper outlet
size, and flying altitude. For best operating performance, it is recommended to
adjust the corresponding variables to achieve a spreading range of 4 - 6 meters
(for Spreading System 1.0) or 5 - 7 meters (for Spreading System 2.0).
Spinner Disk
Washer
M3×8 Screws
Nut
Spreading System 2.0
2.1 kg (excluding fender)
32.3 cm
2
© 2020 DJI All Rights Reserved.
9
Tabla de contenido
