Inserting The Batteries In The Remote Control; Installing The Display On The Wall Attachment Panel; Installation Notes - Samsung PS-50P2HTR Manual De Instrucciones

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when
you:
N Purchase the PDP
N Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
N
+ on the battery against + on the remote control
N
- on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
➢
Do not mix battery types, i.e. alkaline and manganese.

Installing the Display on the Wall Attachment Panel

➢
Wall attachment panel is sold separately. Check with your dealer.

Installation Notes

N Do not install the PDP on any place other than vertical walls.
N To protect the performance of the PDP and prevent troubles, avoid the
followings:
- Do not install next to smoke and fire detectors.
- Do not install in an area subjected to vibration or high voltage.
- Do not install in the wall.
- Do not install near or around any heating apparatus.
N Use only recommended parts and components.
continued...
9
ENG