Cleaning The Soleplate; Troubleshooting - Singer Expert Finish II Manual De Instrucciones

Cleaning the Soleplate

In normal use, a coating may build up on the soleplate from starch, detergent
or burnt synthetic fibers. This can be easily removed by using a quality iron
soleplate cleaner.
When the iron is cold and unplugged, the iron can be cleaned with a damp cloth
and wiped dry.
NOTE: Never use abrasive household cleaners or other chemical agents to
clean the iron.
Never use sharp or rough objects to remove deposits on the soleplate.
P R O B L E M
Iron does not heat
No steam or not enough
steam
Iron is emitting small
particles or odor
Iron is dripping water
from steam vents
If troubleshooting does not solve the problem, please call SINGER
1-800-4SINGER (1-800-474-6437).

TROUBLESHOOTING

R E A S O N & S O L U T I O N
• The iron is not properly plugged in.
• The temperature setting is too low – set the temperature
to a higher setting.
• Auto-Off has been engaged – move or shake the iron
gently to de-activate Auto-Off.
• The water tank may be low or empty – add water.
• The iron is not set to steam setting – for maximum steam,
temperature should be on MAX ••• 200º C.
• This is normal – follow instructions for first time use.
• Water may need to be changed.
• Buildup of mineral deposits inside steam chamber –
see "Self-Cleaning" section.
• Overfilled – do not fill past the MAX line on water tank.
• The iron may not be hot enough – set the temperature
to MAX ••• 200º C .
• Over use of Burst of Steam – allow more time between
bursts.
at
®
13