Cleaning & Maintenance - Singer SteamChoice 3.0 Manual De Instrucciones

Using Your SteamChoice 3.0 Steam Iron
5. Temperature Status light will blink when the iron is heating up.
6. Temperature Status light is solid when warming up and turns off when temperature
is reached.
7. Disconnect the Power Cord from electrical outlet.
8. Hold the iron horizontally over a sink.
9. Move Steam Knob to "Self Clean" setting.
10. Steam and boiling hot water containing scale and
mineral deposits will release from the ArmorGlide
soleplate holes, cleaning out the steam chamber.
11. Gently move the iron back and forth until Water Tank
is empty.
12. Plug in the Power Cord to electrical outlet and set the
iron to "MAX" temperature setting.
13. When the Temperature Status light stays on, move the
iron gently over a piece of used cloth to remove any
water stains that may have formed on the ArmorGlide
soleplate.
14. Disconnect the Power Cord from the electrical outlet and position steam iron back
on its heel rest. Wait for iron to completely cool down before storing.
WARNING: Do not put vinegar or other descaling agents in the Water Tank.
WARNING: Keep skin/body away from the hot water and steam.
CLEANING & MAINTENANCE
1. Disconnect the Power Cord from electrical outlet.
2. Use a damp cloth or non-abrasive cleaner to remove deposits from the ArmorGlide
soleplate.
3. Never use sharp or rough objects to scrape deposits from the ceramic-plated Armor-
Glide soleplate.
4. Never use abrasives, vinegar, or descaling agents to clean the iron.
HELPFUL IRONING TIPS
1. Sort out articles to be ironed according to the type of fabric. This will minimize the
frequency of temperature adjustment for different garments.
2. If you start ironing at a high temperature and then select a lower one, the ArmorGlide
soleplate may take more than 2 minutes to cool down. To speed up the cooling pro-
cess, press the burst of steam button.
3. Test by ironing a small, inconspicuous part of the garment if you are unsure about the
fabric type. Start with a low temperature and increase gradually.
4. Wait for 2 minutes when changing temperature settings. Temperature adjustment
needs time to reach the required heat level, whether it is higher or lower.
5. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to
prevent shine marks.
ENGLISH – 9