Eldom gent G52 Manual De Instrucciones página 10

OPERATION
Shaving
- Fit the head (1) into the body (8) of the device.
- Use the switch (3) to activate the device.
- Place the head on your skin and move it around, gently pressing down.
Note. The surface of the blade should rest flat on the skin.
- After you have finished shaving, use the switch (3) to turn the device off and clean it.
Nose and ears trimmer
- Fit the trimmer (9) into the body (8) of the device.
- Use the switch (3) to activate the device.
- Carefully slide the trimmer tip (9) into your nose or ear and cut the hair.
- After you have finished shaving, use the switch (3) to turn the device off and clean it.
Beard trimmer
- Open the trimmer (6) using the button (7).
- Use the switch (3) to activate the device.
- Apply the trimmer blade (6) to the chin or sideburns, and cut to obtain the desired effect.
- After you have finished shaving, use the switch (3) to turn the device off and clean it.
The unit is equipped with the switch button lock (3) preventing from accidental switching on.
In order to activate the lock, switch on the unit using the switch on button (3) and hold the
button a few seconds.
In order to deactivate the lock, push and hold the switch button (3) for a few seconds.
CLEANING AND PRESERVATION
- Before cleaning turn off the appliance and remove the power cable from the socket.
- After each shaving the blades chamber should be empty. In order to do it you must open the
shaving head housing by pressing button (2) and remove the blades fastening by gently turning
the knob (fig. 1). In order to clean the appliance the attached brush should be used.
- The whole appliance cannot be submersed in water and other liquids.
- Do not use any cleansing agents which are strong and damage the surface.
- Wipe the housing with a moistened cloth.
•
10 PL
FIG. 1
2