English; Prior To Use; How To Use - Braun Multiquick 5 MX 2050 Manual De Instrucciones

English

Our products are engineered to meet the
highest standards of quality, functionality and
design. We hope you thoroughly enjoy the
new Braun appliance.
Important
• Read all use instructions thoroughly before
using this product.
• This appliance is designed for normal house-
hold use only.
• This appliance is not intended for use by
children or persons with reduced physical,
sensory or mental capabilities, unless they are
given supervision by a person responsible for
their safety. In general, we recommend that you
keep the appliance out of reach of children.
Children should be supervised to ensure that
they do not play with the appliance.
• Your voltage must correspond to the voltage
printed on the type plate located on the bottom
of the power base. Connect to AC (~) only.
When connecting to an outlet, the motor must
always be turned off (switch (h) at «O»).
• Blades are very sharp, handle carefully.
• This appliance will not work without the jug in
place on the power base.
• Before switching on, make sure the jug is
properly assembled and in place on the power
base with the lid on.
• Do not use without any load in the jug
(e.g. solid or liquid ingredients).
• Allow hot liquids to cool down to a luke-warm
temperature before pouring into the jug.
• Braun electric appliances meet applicable
safety standards. Repairs or the replacement
of the mains cord must only be done by
authorised service personnel. Faulty, unquali-
fied repair work may cause considerable
hazards to the user.
Specifications
Voltage/frequency: see type plate
Jug capacity:
Description
a Measuring cap
b Easy-grip lid
c Jug
d Rubber gasket
e Blade
6
1.75 litres
f Retainer ring
g Power base
h Switch
i Cord storage

Prior to use

• Clean all parts before using the jug blender for
the first time (see paragraph «Cleaning»).
• Uncoil amount of cord needed from cord
storage at the bottom of the power base and
connect to an outlet.
1 Jug assembly
• Carefully place the blade into the retainer ring.
• Position the rubber gasket onto the rim of the
blade.
• Screw the jug securely into the retainer ring.
2 Attaching the jug
• Make sure that the switch is in the «O» position.
• Place the jug on the power base and push it
down until it is securely locked into place.

3 How to use

• Put the food to be processed into the jug.
• Place the lid firmly on the jug. Insert the
measuring cap into the lid opening and turn it
clockwise to lock.
• Turn the power base on:
Speed Applications
1-3 light applications with liquid
ingredients
3-5 for thicker consistency – mixing both
liquids and solid ingredients
pulse: instant power bursts
(The switch does not catch at this
setting. Hold the switch in pulse
position or turn it to pulse position
repeatedly.)
• After use, always turn the switch to the «O»
position and unplug the power base.
• To remove the jug, lift it straight up; there is no
need to twist it.