Personnel Qualifications; Danger In The Event Of Non-Observance Of The Safety Instructions; Safety Consciousness On The Job; Safety Instructions For The Operator - Wilo HiSewlift 3 Serie Instrucciones De Instalación Y Funcionamiento

NOTE: Useful information on handling the product. It draws attention to possible
problems.
Information that appears directly on the product, such as.
• Direction of rotation arrow,
• Marks identifying connections,
• Rating plate,
• Warning stickers,
must be strictly complied with and kept in legible condition.

2.2 Personnel qualifications

The installation, operating and maintenance personnel must have the appropriate
qualifications for this work. Area of responsibility, terms of reference and
monitoring of the personnel are to be ensured by the operator. If the personnel
are not in possession of the necessary knowledge, they are to be trained and
instructed. This can be accomplished if necessary by the manufacturer of the
product at the request of the operator.

2.3 Danger in the event of non-observance of the safety instructions

Non-observance of the safety instructions can result in risk of injury to persons
and damage to the environment and the product/unit. Non-observance of the
safety instructions results in the loss of any claims to damages. In detail, non-
observance can, for example, result in the following risks:
• Danger to persons due to electrical, mechanical and bacteriological factors,
• Damage to the environment due to leakage of hazardous materials,
• Property damage,
• Failure of important product/unit functions,
• Failure of required maintenance and repair procedures.

2.4 Safety consciousness on the job

The existing directives for accident prevention must be adhered to.
Danger from electrical current must be eliminated. Local directives or general
directives [e.g. IEC, VDE etc.] and instructions from local energy supply companies
must be adhered to.

2.5 Safety instructions for the operator

This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• If hot or cold components on the product/the unit lead to hazards, local measures
must be taken to guard them against touching.
• Guards which protect personnel from coming into contact with moving
components (e.g. the coupling) must not be removed while the product is in
operation.
WILO SE
English
23