Ryobi P7181 Manual Del Usuario

NOTE: These instructions supplement the REMOVING THE ROLLER
BRUSH FOR CLEANING instructions in your operator's manual. For
complete assembly instructions, refer to page 6 of the Operator's Manual.
WARNING:
This insert sheet is not a substitute for reading the operator's manual.
To reduce the risk of injury or death, user must read and understand
operator's manual before using this product.
Your vacuum cleaner comes with a general purpose roller brush prein-
stalled and a replacement roller brush designed to clean high pile carpets
only. Follow these steps to clean or replace a roller brush:
1. Remove battery pack and allow roller brush
to STOP. Remove the roller bar assembly.
2. Rotate the end cap counterclockwise to
unlock and remove the roller brush.
3. Clean the roller brush. Cut any threads or
hair wrapped around the roller brush. For
peak performance, routinely clean the
roller brush.
4. Install either roller brush. Rotate the end
cap clockwise to lock in place.
STICK VACUUM WITH
ROLLER BAR
P7181/P726
Fig. 1
A
B
C
Fig. 2
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579 • www.ryobitools.com
D
A - Roller bar (barre à rouleau, barra
giratoria)
B - End cap (capuchon d'extrémité,
tapa del extremo)
C - Roller brush (general purpose)
[brosse à tapis (pour le but
général), cepillo giratorio (para
usos generales)]
D - Roller brush (for high pile carpets
only)[brosse à tapis (pour les
tapis à poils longs seulement),
cepillo giratorio (solo
alfombras de tejido largo)]
A B
A - Tangled threads and hair (fils et cheveux
emmêlés, hilo y pelo enredados)
B - Roller brush (general purpose)[brosse
à tapis (pour le but général), cepillo
giratorio (para usos generales)]
998000341
8-7-20 (REV:01)
para