LG CL12F.N50 Manual De Propietario página 9

INSTALLATION PLACES
- There should not be any heat source or steam
near the unit.
- There should not be any obstacles to prevent the
air circulation.
- A place where air circulation in the room will be
good.
- A place where drainage can be easily obtained.
- A place where noise prevention is taken into
consideration.
- Do not install the unit near the door way.
- Ensure the spaces indicated by arrows from the
wall, ceiling, or other obstacles.
- The indoor unit must keep the maintenance space.
Ceiling
Ceiling Board
500 or
more
Floor
Chassis
TU/TT
TQ/TR/TP/TP-B
TN/TM/TM-A
More than 300
More than 700
Top view
Inspection hole 600 x 600
Air inlet vents
Control box
600
1 000
or more
or more
Air outlet vents
Front
Side view
• Suitable dimension "H" is necessary to get a
slope to drain as shown in the figure.
More than 100
More than 2 300
Ceiling Board
* The feature can be changed according to
type of model.
500 or
more
Unit : mm
Be very careful while carrying the product.
• Do not have only one person carry product if
H
• PP bands are used to pack some products.
3 300
3 600
4 200
• Do not touch heat exchanger fins with your
More than 700
• Tear plastic packaging bag and scrap it so
(Unit : mm)
• When carrying in Unit, be sure to support it
(unit: mm)
• Use 2 belts of at least 8 m long.
• Place extra cloth or boards in the locations
600
or more
• Hoist the unit making sure it is being lifted at
INSTALLATION PLACES
(unit: mm)
H=20 or more
More than 200
CAUTION
!
it is more than 20 kg.
Do not use them as a mean for
transportation because they are dangerous.
bare hands. Otherwise you may get a cut in
your hands.
that children cannot play with it. Otherwise
plastic packaging bag may suffocate children
to death.
at four points. Carrying in and lifting with 3-
point support may make Outdoor Unit
unstable, resulting in a fall.
where the casing comes in contact with the
sling to prevent damage.
its center of gravity.
9
More than 100
(Unit : mm)