Tabla de contenido
8
6.
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
7.
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
8.
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
9.
Do not move, adjust or rotate the device in the
course of work.
10.
Clean the device regularly to prevent stubborn grime
from accumulating.
11.
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
12.
Keep the device away from sources of fire and heat.
13.
Do not overload the device.
14.
Exceeding the maximum permissible user weight can
damage the product.
15.
Before using the product, make sure that all legs are
the same height. Stretching the legs of the bed to
different heights can make it unstable.
ATTENTION! Despite the safe design of the device
and its protection facilities and despite the use of
additional elements protecting the operator, there
is still a slight risk of an accident or injury when
using the device. When using the device stay alert
and use common sense.
3. USE GUIDELINES
The product is an accessory for massage.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
ATTENTION! This product's view can be found on the
last pages of the operating instructions (pp. 31).
1.
Handle
2.
Button
3.
Hole for armrests
4.
Face cradle
5.
Headrest
6.
Front arm shelf
7.
Armrest
8.
Rope tension
9.
Knee rest
10.
The seat
3.2. PREPARING FOR USE
3.2.1. APPLIANCE LOCATION
Keep the product away from hot surfaces. The device
should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions.
3.2.2. ASSEMBLY
MODELS: PHYSA MARSEILLE WHITE, PHYSA MARSEILLE
BLACK, PHYSA TOULUSE WHITE, PHYSA TOULUSE BLACK,
PHYSA BORDEAUX WHITE, PHYSA BORDEAUX BLACK
1
2
3
4
5
6
7
8
1.
Release the safety device.
2.
Lay the table on its side and stretch the
table legs to the desired height.
•
MODELS :PHYSA MARSEILLE WHITE,
PHYSA
MARSEILLE
BLACK,PHYSA
TOULUSE WHITE, PHYSA TOULUSE
BLACK
To adjust the table height, unscrew the
knobs, remove the movable leg and
insert it into the holes at the desired
height, then screw the knobs back on.
Note: Make sure the legs are the same
height.
•
MODELS: PHYSA BORDEAUX WHITE, PHYSA
BORDEAUX BLACK
To adjust the table height, press the button on
its leg and set the appropriate height. Note:
Make sure the legs are the same height.
3.
Remove all accessories from inside.
4.
Lift the table and place its legs on the floor.
5.
Install the armrests.
6.
Install the front arm-shelf on the headrest holder.
7.
Adjust the headrest and lock it.
8.
Correctly assembled table.
NOTE: the PHYSA MARSEILLE WHITE, PHYSA
MARSEILLE BLACK, PHYSA BORDEAUX WHITE,
PHYSA
BORDEAUX
BLACK
models
have
additionally adjustable leg rest.
MODELS: PHYSA MONTPELLIER WHITE,
PHYSA MONTPELLIER BLACK
1
2
3
3a
4
5
6
6a
7
7a
an
9
Tabla de contenido
