English; Replacing The Batteries - Philips SCD 605/00 Modo De Empleo

XP SBC SC 605 14-02-2003 15:27 Pagina 6
6

ENGLISH

How to use the In-Touch Address Recorder
• Attach the In-Touch Address Recorder to your
child's belt, jacket, etc.
• Make sure that the product is clearly visible
with the red SOS/ADDRESS button (2) at the
front.
Always check the recording before you use the
product. If sound quality is not good anymore,
replace the batteries.

Replacing the batteries

The In-Touch Address Recorder comes with 4 A76P
type batteries. When replacing the batteries you can
also use regular A76 batteries.These batteries,
however, may have a shorter lifetime.
1 Unscrew the screw at the back of the product.
2 Remove the back cover.
3 Remove the empty batteries.
4 Insert the new batteries.
Pay attention to the polarity of the batteries.
5 Put the back cover back in place.
6 Tighten the screw.
Important information
– Only use batteries of the same type.
– Dispose of the batteries in an environmentally
friendly way.
– Do not mix old and new batteries.
– Do not mix different types of batteries: alkaline,
standaard or rechargeable batteries.
– If the product is not used for a long period,
remove the batteries. Leakage can cause damage
of the product.
– Do not recharge non-rechargeable batteries.
– Empty batteries need to be removed from the
product.
– Do not short-cut the battery connection points.
– Install all batteries correctly, + and - as marked on
the unit.
– Do not mix old and new batteries or carbon and
alkaline, etc.
– Remove batteries when the unit is not used for a
long time.
– Batteries contain chemical substances, so they
should be disposed of properly.
ENGLISH 7