Steamery Cirrus 3 Manual página 4

measure, ensuring that the steamer won't suddenly
be jetting out hot water.
Auto-shutdown
The steamer will automatically power off after 30
minutes of being idle.
On/Off switch
Leave the steamer plugged in while not in use and
save time.
Steam button
Press while steaming in order to save water.
Water tank
The upright water tank is steady and slides into the
body of the steamer with a smooth magnetic click.
Steady pressure regardless of the amount of water
left in the 90ml tank.
Water and Water Quality
Cirrus No.3 is equipped with limescale traps – small
pockets on the inside – that minimize the risk of
limescale clogging the steamer. However, to make
your Cirrus No.3 last longer, we recommend the
water qualities listed below.
We strongly recommend:
• Steamery's Steam Water
• Bottled or filtered still water, i.e., water meant
for drinking
• Distilled water
• Deionized water (also known as battery water)
and unscented ironing water
All of the above will radically prolong the lifetime of
your steamer.
Scan QR-code to purchase Steam Water
We also recommend (with some words of advice):
• The steamer works well on regular tap water
– make sure the water you're using is soft (if
you live in a region with hard water, or if you're
traveling and don't feel certain, use still water
from a bottle meant for drinking)
We DO NOT recommend:
• DO NOT USE SCENTED AND
PERFUMED STEAMING WATER, IT
WILL CLOG THE STEAMER AND
EVENTUALLY MAKE IT STOP WORKING
PROPERLY
User manual
• NEVER USE OTHER FLUIDS THAN WATER
• DON'T ADD DETERGENTS OR CLEANING
PRODUCTS
User Instructions
Preparations
1. Remove the water container by pulling it in the
opposite direction from the steamer body.
2. Gently lift the rubber plug on top of the water
container and fill it.
3. Close the water container and put it back in
position in the steamer.
4. Remove the protective shield from the heat plate.
2
EN