Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Do not insert battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
m
WARNING!
Before performing any maintenance,
make sure battery is removed. Failure to heed this warning
could result in serious personal injury.
m
WARNING!
To prevent serious personal injury,
make sure the switch is in the OFF (0) position, the battery is
removed and the impeller has come to a complete stop before
attaching or detaching the tubes.
Attaching the Jet Blower Tube
1. Align the notches on the cordless turbine jet blower body
with the notches on the upper blower tube and slide
together until they click into place. Repeat with the upper
tube and the lower tube, making sure they click into place
(Fig. 5).
Cordless turbine jet
blower body
Notches
Lower blower
tube
m
WARNING!
To avoid the risk of injury, it is not
recommended to disassemble the blower tube.
Operation
Starting + Stopping
m
CAUTION!
Starting, stopping, and restarting a DC
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless turbine jet blower, always wait at least five seconds
after stopping before restarting the jet blower.
1. Insert the battery into the battery compartment until it
clicks to lock it into position (Fig. 6).
2. To start the cordless turbine jet blower, slide the ON/OFF
Fig. 5
3. To turn the tool off, slide the ON/OFF switch to OFF (0)
R
Operating Tips
m
daylight or good artificial light.
• When using the cordless turbine jet blower, plant your feet
• Wear personal protective equipment during your work
10
Fig. 6
switch to ON (I) (Fig. 7).
Fig. 7
I (ON)
(Fig. 8).
Fig. 8
WARNING!
Use the cordless turbine jet blower only in
firmly on the ground and place your dominant hand on
the unit handle to control the unit. Use your other hand to
steady the unit as needed.
session. This includes boots, safety glasses/goggles,
ear defenders, long pants and a long-sleeve shirt.
Battery
pack
Battery
compartment
ON/OFF switch
Tabla de contenido
