Installation; Operation - cecotec Power titanium 850 Manual Del Usuario

ENGLISH

3. INSTALLATION

1. Clean the measuring cup, lid, and jar (except main body) before using it for the first time.
2. Make sure the appliance is turned off and not connected before proceeding with the installation.
3. First of all, place the sealing ring on the blade base; then, insert the blade base into the jar; finally,
lock it in place with the fixing ring. Make sure that the blades are properly attached to the jar, in
order to avoid leakage that could damage the appliance.
4. Fit the blender glass jar onto the main body, and turn it in clockwise direction until it clicks into
place. Fill the jug with the desired foodstuffs. Please, make sure its contents do not spill from the jar
(maximum water capacity: 0,8 l).
5. Place the lid on top of the jar and push it down. Place the measuring cup on the centre of the lid
and lock it into place.
DO NOT USE THE APPLIANCE WHEN IT IS EMPTY

4. OPERATION

1. Plug the appliance to the mains supply. Make sure the selector knob is in position 0 before plugging in the
appliance.
2. This appliance has a safety system that does not allow it to work, unless the jar is properly installed on the
main body.
3. Turn the knob to position 0, in order to turn the blender off.
4. Fill the jar with the desired foodstuffs.
5. Close and fix the lid on the jar. Place the measuring cup on the centre of the lid and turn it to lock it.
6. Place the glass jar onto the main body.
7. Select the desired speed with the knob (1-5).
8. Hold the knob in position (P/Turbo) to work at maximum speed. Ideal to crush ice.
9. When the desired result is achieved, turn the knob to the position 0 to stop the blender.
10. Remove the jar from the main body when the blades stop rotating and serve its content.
Power titanium 850
13