Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. To turn off the appliance press button ON/STAND-BY (A) and remove the plug from the outlet.
NOTE: The display can show the temperature in both °F and °C. To select, press and hold the + key
for few seconds, then release.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: With the appliance STAND-BY, press the timer button (F) (
The display shows the symbol
+ and - adjustment buttons (B), then wait a few seconds for the programming to be set.
The display returns to showing "--" for stand-by and the symbol
When the programmed time has been reached, the appliance turns on with the same settings it had
during the previous operation.
Delayed shut-off: With the appliance on, press the timer button (F) (
symbol
and the time remaining before shut-off.
To set the timer, use the + and - adjustment buttons (B), then wait a few seconds for the programming
to be set. The display returns to showing the current settings and the symbol
have set the timer. When the programmed time as been reached the appliance shuts off automatical-
ly. If you want to go back to operation without the timer, press the timer button (F) twice.
The timer symbol
USING THE REMOTE CONTROL
The remote control functions correspond to those on the control panel. See the section "Opera-
•
tion and Use" on the previous page. for a description of the functions.
I
NSERTING OR REPLACING THE BATTERIES
• Remove the cover on the rear of the remote control;
• Insert two AAA (R03/1.5V) batteries (included but packaged separately) making sure they
are in the correct position (see the instructions inside the battery compartment);
• Replace the cover.
• Old batteries must be removed and disposed of in accordance with current legislation as
they are harmful to the environment.
MAINTENANCE
-
Before carrying out any maintenance, always remove the plug from the power outlet.
-
During the season when the appliance is being used, regularly clean the air intake and
outlet grilles using a vacuum cleaner.
-
Never use abrasive powders or solvents to clean the appliance.
-
Remove the back grille by pulling it outward (Fig. 1).
Remove the dust filter that filters impurities from the air taken in from the room, blow it ligh-
tly, then reposition it in the appliance.
WARNINGS
-
Never use this heating appliance in the immediate vicinity of a bathtub, shower, or swimming pool.
-
Use the appliance always and only in the vertical position.
-
Do not use the appliance to dry laundry, and do not obstruct the air intake and outlet grilles
(danger of overheating).
-
Do not operate the appliance in contact with walls, furniture, curtains, etc.
-
If the power cord is damaged, it must be replaced by the manufacturer, the authorized service
facility, or a qualified electrician, in order to prevent the risk of malfunction.
-
Do not cover the appliance while it is operating, as this could potentially cause a fire.
-
Do not use this appliance in a room smaller than 43 square feet (4 m²).
-
Heaters should never be used with an extension cord or outlet strip. Heaters should be plugged
directly into an outlet.
-
Do not use the appliance before assembling the base, as shown on paragraph "assembling the
appliance".
6
and the time remaining before switch-on. To set the timer, use the
disappears from the display.
).
to indicate you have set the timer.
). The display shows the
to indicate you
Tabla de contenido
