Using The Remote Control - DeLonghi HFX66V15C Manual De Instrucciones

- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/
EEC ON RADIO INTERFERENCE SUPPRESSION.
Operation and use
- Connect the appliance to the power outlet.
- The appliance emits a beep and the power indicator
light (G) also comes on and remains lit while power to
the appliance is on. The appliance goes into STAND-BY.
- Press the ON/OFF button (A) to turn on the appliance. It
will begin to heat with the predefined settings.
- Press the MODE button (F) to select one of the following
functions available:
Ventilation
l
In this operating mode only the fan operates, so the
appliance does not heat the room.
Anti-freeze
l
In this operating mode the appliance keeps the room
at a temperature of 45°F (7°C) to prevent freezing
temperatures.
Heating 1 and Heating 2
l
In this operating mode you can set the desired
temperature by pressing the + and - adjustment
buttons (B).
Heating 1 (minimum power level):
-
The appliance operates at the minimum power, reducing
noise and energy consumption to the minimum.
Heating 2 (maximum power level):
-
The appliance operates at the maximum power for rapid
heating of the room.
ECO PLUS function
In this operating mode the appliance will automatically set
the power level to guarantee the best comfort reducing the
energy consumption. In this operating mode the unit may
switch the heating power level from maximum to minimum
as needed, several times in an hour. When using the ECO PLUS
function, the maximum temperature setting is 79°F (26°C).
To activate this function, press the ECO PLUS button (D).
Swivel button
If you want the appliance to distribute the airflow over a
larger area, press the oscillation button (C)
will then oscillate right and left. To stop the oscillation in the
desired position, just press oscillation button (C) again.
Turn the appliance off
To turn off the appliance press button ON/OFF (A). The
display could show the count down for about 6 seconds. To
completely turn off the appliance, remove the plug from the
socket.
in both °F and °C. To change the temperature scale, press
and hold the + key for few seconds, then release. Please be
informed that as this is not a precision device, the showed
temperature not necessary corresponds to the real one.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: with the appliance in the STAND-BY
position, press the timer button (E)
The display shows the symbol
before switch-on. To set the timer, use the + and - adjustment
buttons (B), then wait a few seconds for the programming
to be set. During the first ten hours, you can select half hour
intervals. For times greater than ten hours, one hour intervals
can be selected. The display returns to show
by and the symbol
When the programmed time has been reached, the appliance
turns on with the same settings it had during the previous
operation.
Delayed shut-off: With the appliance on, press the timer
button (E)
time remaining before shut-off. To set the timer, use the +
and – adjustment buttons (B), then wait a few seconds for
the programming to be set. During the first ten hours, you
can select half hour intervals. For times greater than ten
hours, one hour intervals can be selected. The display returns
to show the current settings and the symbol
you have set the timer. When the programmed time as been
reached the appliance shuts off automatically. If you want
to go back to operation without the timer, press the timer
button (E) twice.
The timer symbol

Using the remote control

The remote control functions correspond to those on the
control panel. See the section "Operation and Use" on the
previous page for a description of the functions.
. The appliance
If swallowed, it could cause severe injury or death in just 2
hours. Seek medical attention immediately.
Inserting or replacing the batteries
- The remote control is provided with a lithium button
battery CR2032. To let the appliance function, remove
the battery cover strip, by pulling it.
6
Please note: The display can show the temperature
to indicate you have set the timer.
. The display shows the symbol
disappears from the display.
Important! This product contains a button battery.
.
and the time remaining
for stand-
and the
to indicate