Tabla de contenido
Idiomas disponibles
Idiomas disponibles
When the reversing switch lever is in the neutral
position, the switch trigger cannot be pulled.
Changing the impact force
2
3
4
1. Changed in three steps
2. Hard
3. Medium
4. Soft
5. Button
014644
Impact force grade
displayed on panel
Hard
Medium
Soft
014829
You can change the impact in three steps: hard,
medium and soft mode.
This allows a tightening suitable to the work.
Every time the button
changes in three steps.
For approximately one minute after releasing the switch
trigger, the impact force can be changed.
1
Maximum blows
3,500
-1
(min
)
2,600
-1
(min
)
1,800
-1
(min
)
is pressed, the number of blows
5
Application
Tightening when force
and speed are desired.
Tightening when you need
good controlled power.
Tightening when you need
fine adjustment with small
diameter bolt.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before carrying out
any work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and inconsistent
fastening torque and/or damage to the bolt or nut.
7
Work
Assembling the steel frame.
Assembling or disassembling
scaffolds or framework.
Assembling the furniture.
Tabla de contenido
