Unix/Linux - Lexmark C510 Manual De Instrucciones

Mac OS X version 10.1.2
and later
Note:
If you don't know
which printer to select, look
on the Network Setup page
under the AppleTalk heading
to find the default name of
the printer.

UNIX/Linux

Note:
The Sun Solaris and
Linux packages are available
on the drivers CD and on our
Lexmark Web site at
.
www.lexmark.com
Step 1: Install a custom PPD file
1
Insert the drivers CD into your CD-ROM drive.
2
Click Mac OS X
3
Double-click the installer icon for your printer to run the installer.
Step 2: Create a print queue in Print Center
1
Click Applications
2
Click Add Printer.
3
Choose AppleTalk as your method of connection.
4
If you have a routed network, select the zone from the list. If you
don't know which zone to select, look on the Network Setup
page under AppleTalk for Zone.
5
Select the new printer from the list, and then click Add.
6
Verify printer installation:
a
Click Applications
b
Choose File
shows the PPD installed for your printer.
• If the PPD file displayed in the Summary window is
correct for your printer, printer setup is complete.
• If the PPD file displayed in the Summary window is not
correct for your printer, delete the print queue from Print
Center and repeat "Step 1: Install a custom PPD file" on
page 55.
Your printer supports many UNIX and Linux platforms, such as Sun
Solaris and Red Hat. Visit our Lexmark Web site at
www.lexmark.com for a complete list of supported UNIX and Linux
platforms.
Lexmark provides a printer driver package for each supported UNIX
and Linux platform. The User's Guide in each package gives detailed
instructions for installing and using Lexmark printers in UNIX and
Linux environments.
Install drivers for network printing
55
English.
Utilities Print Center.
TextEdit.
Print Summary. The Summary window