NOT SO7010-50 CD060021.qxd
Starting the programming
1
Press the PROG 24h button (long press).
Setting the start time
2
Press the
button for the start time for this operating
range (periods of 30 minutes).
Validating the start time
3
Press the VALID button to validate the start time
of this operating range.
Setting the stop time
4
Press the
button for the stop time for this operating
range (periods of 30 minutes).
Validating the stop time
Press the VALID button to validate the stop time
5
of this operating range
Setting the operating mode
6
Select the operating mode of this range by pressing
the MODE button
Validation of the operating mode and starting
the PROG 24h mode
7
Press the VALID button once to validate the mode
and start the PROG 24h mode.
The PROG 24h function is now active. The appliance
will start and stop every day according
to the programming you have selected.
When the PROG 24h function is active (after step no. 7), you can carry out the following operations:
• Deactivate the PROG 24h function: Press (short press) the PROG 24h button.
The appliance is again in manual mode.
• Starting or stopping the appliance temporarily while conserving the PROG 24h function active: Press the
The programming will start again automatically during the following programmed step.
• Adding or modifying a programmed operating range: Use the same method as for the 1st programming ("Starting the programming" step no. 1 above).
The appliance offers the possibility of programming 7 operating ranges. ATTENTION: programming ranges cannot overlap.
• Cancelling a programmed operation range:
- Enter the programming of the PROG24H function by a long press on the PROG24H button
- Go to the operating range to be cancelled (with the + or - buttons)
- Press the ANNUL button.
Each operating range may be cancelled in this way.
• Cancelling all the programmed operation ranges at once: Unplug the appliance for more than 1 minute.
This operation consists of cancelling the programming of the PROG 24h function completely.
When the appliance is in manual operation (PROG 24h function deactivated) and an operating range has already been programmed, you can activate the PROG 24h function
using the following method:
- Start your appliance (see §1a).
- Press the PROG 24h button (short press).
the PROG 24h function is then active (PROG 24H Indicator lit, "bar graph" visible on the LCD panel), your appliance will start and stop automatically every day at the times
shown on the bar- graph.
MAINTENANCE OF THE APPLIANCE
• The appliance must be unplugged and left to cool completely each time before maintenance and cleaning.
• You can clean it using a slightly damp cloth.
• Important: do not use abrasive products which might damage the appearance.
• We recommend cleaning the air inlet and outlet grills at least once a year (clean with a vacuum cleaner if necessary).
STORAGE
• Your appliance must be left to cool completely before it is stored.
• To store your appliance, the cord may be wound around the appliance (see fig. 1b and 2b).
• When you are not using the appliance, it should be stored in a place free from humidity.
IN THE EVENT OF PROBLEMS
• Never dismantle your appliance yourself. A poorly repaired appliance may be dangerous for the user.
• Before contacting one of our Approved Service Centres (see phone number at the back of the instructions), ensure that:
- the appliance is set to the normal operating position;
- the air inlet and outlet grills are totally clear
HELP PROTECT THE ENVIRONMENT!
Your appliance contains many materials that may be valorised or recycled. Please take it to a local civic waste-
collection point so that it may be processed.
If you have any product problems or queries, please contact our Customer Relations Team first for expert
help and advice.
30/06/06
11:06
Page 11
button.
If you have any problems or queries please call our
Customer Relations Team for expert help and advice:
HELPLINE:
(01) 461 0390 - UK
(01) 4751947 - Ireland
Or consult our web site: www.rowenta.co.uk
(if this is a Rowenta product).
GB