Plastimo ECHOFISH 600 Manual De Instalación Y Funcionamiento página 16

f- Fit the twist&tilt structure to the sonar unit.
g- Hold the bracket to the back cover, with the protruding
strip (on the bracket) matching the slot (on the bracket).
Then press the bracket into the sonar unit. Finally, properly
tighten the locking bolt.
h- Fix the fishfinder on the installation surface.
1.2 Connecting the power cable to the boat
Your fishfinder includes a 1.5 m long power cable. C onnect
the power cable to the transducer and battery correctly.
Warning: some boats may have a 24 or 36 volt electric system. The
Echofish 600 accepts a 12 volt electric system. Any damages from
the surplus power will void your warranty.
16
Echofish 600 – Installation & Operation manual