Overview; Installation And Use - Olympia NL 300 Manual De Instrucciones

Overview

6
1 LEDs
2 Portable lamp
3 Light sensor

Installation and Use

1. Plug the charger of the LED portable lamp with emergency and night
light functions in an easily accessible power socket (230V ~50Hz).
The charger is equipped with a flat, two-pin plug which can be ro-
tated 90° so that it can be plugged into power sockets with horizon-
tal and vertical pin arrangements.
2. Insert the portable lamp in the charger with the night light at the bot-
tom (full charging duration is 24 hours).
3. Select one of the three operating modes.
4. To use the flashlight function, simply take the portable lamp out of
the charger (switch set to ON). The portable lamp can provide light
for up to 5 hours.
5. The night light (sensor-controlled night light) switches on automati-
cally when the room starts to get dark (switch set to AUTO); in this
case, the portable lamp must be inserted in the charger.
6. The emergency light switches on automatically in the event of a
power failure (switch set to AUTO or ON); in this case, the portable
lamp must be inserted in the charger.
ON Switch set to ON - activates the portable lamp function.
OFF Switch set to OFF - deactivates all the lamp functions.
AUTO Switch set to AUTO - activates the emergency/night light function.
1
2
4
8
3
5
4 Night light LED
5 Charger
6 Charger plug (rotates 90°)