Stocker Magma E-35 TP Manual De Instrucciones página 73

Pruning shears Magma E-35 TP - Pruning shears Magma E-35 TP with telescopic handle
7
Operating instructions
Progressive cutting:
1. Push the ON/OFF switch and wait for the audible tone (1 beep) to release.
2. Quickly pull the trigger twice, repeatedly, to unlock the blades. The shears emit an audible
tone (1 beep) and the blades open.
3.
The shears now automatically work in progressive cutting mode. It is now possible to start
working.
Switching from progressive/automatic cutting mode:
1. Keep the trigger pulled until an audible tone is emitted (1 beep) to activate the cutting
mode. With this operation, the blades close and the shears automatically get into security
lock mode.
2.
Quickly pull the trigger twice, repeatedly, to unlock the blades. It is now possible to start
working.
Customizing the aperture of the blades:
1. Set the shears into progressive cutting mode, following the instructions written above.
2. Slowly and progressively pull the trigger in order to close the blades down to the preferred
maximum aperture, then keep the wished position for 3 seconds. The shears emit an
audible tone (1 beep) to confirm the setting. The shears automatically get into security lock
mode.
3. Quickly pull the trigger twice, repeatedly, to unlock the blades. The shears emit an audible
tone (1 beep) and the blades open.
4. The shears are now in progressive cutting mode with the new customized maximum
aperture. It is now possible to start working.
Attention: to operate the shears in automatic cutting mode with customized blade's aperture,
first set the preferred aperture of the blades and then activate the automatic cutting mode.
144
Art. 312 / Art. 582 / Art. 583
Usage
Art. 312 / Art. 582 / Art. 583
Pruning shears Magma E-35 TP - Pruning shears Magma E-35 TP with telescopic handle
Usage
Attention: to restore the aperture of the blades to maximum (standard), carry out the steps for
blades' lock/unlock described as follows.
Manual activation of the security lock/unlock of the blades:
1. To activate the security lock of the blades, keep the trigger pulled until the shears emit an
audible tone, followed by other three repeated audible tones (1 beep, 1 beep-beep-beep).
With this operation, the blades close. By pulling the trigger, the blades don't move.
2. To deactivate the security lock of the blades, quickly pull the trigger twice, repeatedly. The
shears emit and audible tone (1 beep) and the blades open to maximum aperture. Now the
blades close whenever the trigger is pulled.
Attention: every time that the shears are manually set into security lock mode, all the settings
are restored to standard. Therefore, once the security lock is deactivated, the shears will be in
progressive cutting mode with maximum aperture of the blades.
For further information about the product, please contact [email protected]
7
145