ISOUND ConcertBlok Guia Del Usuario página 4

Volume Buttons
• Press the Volume Down Button to lower the volume.
• Press the Volume Up Button to raise the volume.
NOTE: Pressing the volume buttons only control the volume of the ConcertBlok speaker. Device
volume should be adjusted separately.
HOW TO CHARGE YOUR CONCERTBLOK BLUETOOTH SPEAKER
NOTE: Make sure that your ConcertBlok Speaker is fully charged before using it for the first
time.
1. Plug the USB end of the included charge cable into a powered USB port, such as a computer,
laptop or USB AC adapter (not included).
2. Plug the Micro-USB end of the cable into the charge port labeled DC-5V located on the back
of the speaker.
3. The LED indicator light located in the middle of the Power/Play/Phone Button will illuminate
solid red. Once the speaker is fully charged, the LED indicator light will turn off.
CONNECTING A DEVICE VIA BLUETOOTH (FIRST TIME SET-UP)
1. Press and hold the Power/Play/Phone Button until you hear a sound. The LED indicator light
located on the top of the speaker will flash blue.
NOTE: Once the LED is flashing blue, you can connect your device to the speaker via Bluetooth.
2. Open the settings on your smartphone, tablet or computer (Bluetooth must be enabled).
3. Select ConcertBlok from the devices list.
4. Once paired, you will hear a sound and the LED indicator light will slowly flash blue.
5. Volume can be adjusted from either your device or by using the volume buttons on the
ConcertBlok.
6. Tracks can be changed by using the track buttons on the ConcertBlok.
NOTE: Your device will automatically find and pair with the ConcertBlok after the initial pairing.