Andis MBG-2 Manual De Uso Y Cuidado página 3

5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
8. Do not use this appliance with a damaged or broken blade
or comb, as injury to the skin may occur.
9. To disconnect turn control to "off" then remove plug from
outlet.
10. WARNING: During use, do not place or leave appliance
where it may be (1) damaged by an animal or (2) exposed
to the weather.
11. For trimming purposes only.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR HOUSEHOLD USE
To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.
OPERATING INSTRUCTIONS
Before starting clipper, remove blade guard (some models may not have a
blade guard). Plug cord into electrical outlet, operate at 120 volt, 60 cycle
AC electrical current or as noted on the unit. To start clipper, move switch
button to ON position. To stop clipper, move switch button back to original
position. After using your clipper, rewrap cord and store in a safe place.
USING ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a coarser cut by attaching any of the snap-on
attachment combs made for your clipper. The attachment combs mount
easily–they snap on and off (Figures A & B). These attachment combs guide
hair into the clipper blades and give you precise control of hair lengths.
The length of trim is indicated on the comb: 1/8", 1/4", 3/8" and 1/2".
Use the chart to find the approximate lengths of cut. Different blade angles
in relation to the skin, thickness and texture of the hair will vary the cutting
length.
3