Filling Fuel; Flame Ignition; Flame Height Regulation - Planika FLA3 Manual Del Usuario

1. Open the lid (I) and turn the device on by pressing
2. If the fuel tank is empty
pump inlet 'a' (you will hear a click sound) and the power cord 'b' (II)
3. Place the fuel container stably on the floor and insert the pump hose 'c' (III). Press and hold the button
on the pump to start refuelling (IV).
When the fuel bottle is empty, replace it with a full one and continue using the pump (see: section 3 above). The pump
will stop refilling when the fuel tank is full (you will hear a beep).
4. Unplug the power cord 'b'. To unplug the pump, hold the pump inlet 'a' and firmly press the release button (V).
5. Shake the remaining fuel from the hose 'c' to the container and place the pump in the bag (VI).
When the START/STOP button is lit up in green, the device is ready to be launched.
Press START. Firing up of the device takes from 2 to 10 minutes (FLASHING GREEN LIGHT). During the process of
firing up, scent of fumes can be present. When the lights stop flashing, the device is lit up and has reached the working
temperature.
When the flame is on, press the
one of the six flame heights. The flame starts on height 4 by default.
NOTE. In case of too high a temperature of the device, the flame height will be automatically decreased and locked
from changing. If the temperature continues to increase, the flame will be extinguished (RED LIGHT)

FILLING FUEL

(START/STOP BUTTON BLUE LIGHT ON)

FLAME IGNITION

FLAME HEIGHT REGULATION

or button on the remote or scroll the flame level bar in the mobile app to choose
.
or you want to refuel the fireplace, firmly plug in the fuel
(BLUE LIGHT FLASHING).
14