Fermax iLOFT Manual De Instalador Y Usuario página 64

VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit
NOTE: If there is more than one iLoft monitor in the system and a call is made to a
monitor, the rest of the monitors will show a blue led warning that the channel is busy.
Pag 30
Answering a call
Hands free mode:
When the call button on the Entry panel is pressed a call tone is
emitted both from the panel and on the monitor, causing the
screen to start up.
Press the button to speak with the visitor. The audio channel between
the street and the home will be opened; operating in hands-free mode.
The communication will automatically end after 90 seconds, or at
any time by pressing the
The led will remain lit (blue) for the duration of the conversation.
If communication is not established with the entry panel, the moni-
tor will automatically turn off after 30 seconds.
While in simplex conversation mode (press the
speak and release to listen).
When the call button on the Entry panel is pressed, a call tone
is emitted both from the panel and on the monitor, causing the
screen to start up. Press the
input audio channel activated. The simplex mode is indicated by
the flashing blue led light.
From this moment on, each time you press the
audio channel is activated (constant blue led light) and when
releasing it it activates the input audio channel (blue flashing led
light) the operation is in simplex mode. The communication will
automatically end after 90 seconds, or at any time by pressing the
button. Once disconnected the blue led will turn off.
If communication is not established with the entry panel, the monitor
will automatically switch off after 30 seconds.
Manual Monitor Activation (Auto-Start)
With the monitor on standby, press and hold this button
image appears (less tha 2 seconds).
If there is more than one camera in the installation, to view the
second camera's image you must release the button and re-press
it until the second camera's image appears.
To activate the audio and speak to the visitor or open the door,
follow the steps above.
If communication is not established with the entry panel, the moni-
tor will automatically switch off after 30 seconds.
button.
button to talk to the visitor, leaving the
button to
button, the output
until the