Seca 374 Manual Del Usuario página 8

Ocultar thumbs Ver también para 374:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Connection for mains unit:
Operation
Weighing correctly
– With the scales empty, press the start
button.
se(a
88888.
0. 0 00
,
and
appear consecu-
tively in the display. The scale is then auto-
matically set to zero and ready for
operation.
– Place the baby on the scale.
– Read the weight off the digital display.
8
The display shows divisions of 5 g for
weights of up to 10 kg and divisions of 10 g
for weights of up to 20 kg.
Pressing the START key again switches off
the scale.
If the scale is operated with a mains unit,
the
symbol appears in the display.
Auto hold function
For weights above 2 kg, the HOLD function
is activated automatically. The display flash-
es until a stable weight has been measured.
The display is then frozen until the next
weighing operation takes place. HOLD ap-
pears in the display.
To perform another measurement without
having to first remove the weight from the
scales, press the HOLD button.
Automatic shut-down/power-saving
mode
To save power, the scale switches itself off
after a short time if there is no load on it.
When using a mains adapter, the scales will
not switch off automatically.
Switching the weight display
Switch on the scale. Weight is initially dis-
played in the last setting used, either in kilo-
grammes or pounds.
To change the weight display, press the kg/
lbs key until the display changes.
Taring weight display (TARE)
The tare function is useful if an additional
weight (for example a cloth or pad on the
weighing surface) is to be ignored in the
weighing result. Proceed as follows:
press the TARE key while the additional
weight is on the scale and wait until
appears in the display.
Important!
The maximum additional weight is 10 kg.
The maximum weight which can be dis-
played is reduced by the weight of the ob-
jects already placed on the scale.
You can now perform as many weighing
operations as you like with this additional
weight.
You can switch off TARE by pressing the
TARE key again or by switching off the
scale.
Cleaning
Clean the weighing tray and the housing as
required using a domestic cleaning agent or
a commercially-available disinfectant. Fol-
low the manufacturer's instructions.
0. 0 00
Tabla de contenido
loading

Tabla de contenido