First Time Setup - Powis Parker FASTBACK 8x Manual Del Usuario

All manuals and user guides at all-guides.com
III

FIRST TIME SETUP

A. What's Included Inside the Box
Fastback. Model 8x Binder
Accessory box, which contains:
If any of the preceding items are damaged or missing,
contact your dealer immediately.
B. Setting Up
Place the binder on a flat, unobstructed work surface. Insert the three
book support fences into the slots on the top of the binder. The side
with the word FRONT should be facing you (see figure 2).
C. Plugging In
2
F I G U R E Before plugging in the Fastback binder, be sure the power switch is off by
depressing the "O" side of the power switch. Plug the power cord into
the outlet on the back of the machine.
D. Ready To Go
Turn the power switch on by depressing the "1" side of the power
switch. In a few moments the display will read "READY TO BIND".
Now the machine is ready to bind.
HINT :
not binding. However, if the machine will not be used for several hours,
save power by turning it off.
!
C A U T I O N
heater surfaces during binding. Do not touch
heaters immediately after removing book.
C A U T I O N
foreign objects into binding cavity during binding
process. Binding cavity closes during binding
process and may pinch.
FASTBACK MODEL 8x USER'S MANUAL, L4079 Rev. C 04/08/05
User's manual
Power cord
3 Book support fences
Starter kit of covers and Lx-Strips™
Lx-Strip color fan image sheet
The Model 8x Binder consumes relatively little power when it is
:
Heaters are hot. Do not touch
:
Do not place fingers and other
5