Wahoo KICKR BIKE Manual Del Propietario E Instrucciones De Montaje página 11

KICKR BIKE ASSEMBLY
Attach included pedals(or your own, if
preferred) to the crank arms.
Some pedal axles may require the use
of washers (included) for necessary
clearances to KICKR BIKE housings.
The KICKR BIKE crank arm is designed for
you to customize your bike fit. This design
accommodates 165mm, 167.5mm,
170mm, 172.5mm and 175mm crank
lengths by simply moving your pedal to
the corresponding hole on the crank arm.
Identify the left and right pedals. Grease
the threads on both pedals. Thread the
right pedal into the drive side crank using
washer for correct spacing (if needed).
Use a wrench to ensure snug fit. Thread
the left pedal into non drive side crank
using washer for correct spacing (if
needed). Use a wrench to ensure snug fit.
The included pedals require a 6mm Allen
wrench.
have right-hand threads (removes counterclockwise, installs clockwise).
The left side pedal has left-hand threads (removes clockwise, installs
counterclockwise). Improper installation or cross threading can cause
damage to the KICKR BIKE's cranks.
Use the included AC power adapter to
connect the KICKR BIKE to a standard
wall outlet.
continued
NOTE: Pedal threads are different from left to right. Right side pedals
Tightening torque
6
30 - 35 N- m
mm
10