Urmet 1083/80 Guia Del Usuario página 7

the jumper SCQ:
• Position Q: the pedestrian door lock release button of any system user activates the decoder.
• Position C: the pedestrian door lock release button of any user of the column "Column ID" activates the
decoder.
• Position S: the pedestrian door lock release button of all apartment stations (also those in parallel) of the
user in the column "Column ID" and user code "CODE" (the one used to acquire the event) activates the
decoder.
§
The position of special decoder dip-switches CODE is irrelevant for the operation with pedestrian door
lock release button.
EVENT: DRIVEWAY DOOR LOCK RELEASE BUTTON FROM APARTMENT STATION
Program the event by pressing the driveway door lock release button of an apartment station, which must
activate the special decoder relay (see paragraph about events programming).
Assume that this apartment station is in the column number "Column ID" and has user code "CODE".
When the programming procedure has been performed, the relay is activated according to the position of
the jumper SCQ:
• Position Q: the driveway door lock release button of any system user activates the decoder.
• Position C: the driveway door lock release button of any system user in the column "Column ID" activates
the decoder.
• Position S: the driveway door lock release button of all apartment stations (also those in parallel) of the
user in the column "Column ID" and user code "CODE" (the one used to acquire the event) activates the
decoder.
§
The position of special decoder dip-switches CODE is irrelevant for the operation with driveway door
lock release button.
EVENT: 'CALL TO SWITCHBOARD' BUTTON FROM APARTMENT STATION
Program the event by pressing the 'call to switchboard' button of an apartment station, which must activate
the special decoder relay (see paragraph about events programming).
Assume that this apartment station is in the column number "Column ID" and has user code "CODE".
When the programming procedure has been performed, the relay is activated according to the position of
the jumper SCQ:
• Position Q: the 'call to switchboard' button of any system user activates the decoder.
• Position C: the 'call to switchboard' button of any system user in the column "Column ID" activates the
decoder.
• Position S: the 'call to switchboard' button of all apartment stations (also those in parallel) of the user
in the column "Column ID" and user code "CODE" (the one used to acquire the event) activates the
decoder.
§
The position of special decoder dip-switches CODE is irrelevant for the operation with 'call to
switchboard' button.
EVENT: 'SPECIAL FUNCTIONS' BUTTON FROM APARTMENT STATION
§
To know system conditions needed to activate the event, see booklets provided with apartment
stations.
Program the event by pressing a 'special function' button of an apartment station, which must activate the
special decoder relay (see paragraph about events programming).
Assume that this apartment station is in the column number "Column ID", has user code "CODE" and the
number of the special function associated to that button is "SPEC".
When the programming procedure has been performed, the relay is activated according to the position of
the jumper SCQ:
• Position Q: the 'special function' button "SPEC" of any system user activates the decoder.
• Position C: the 'special function' button "SPEC" of any system user in the column "Column ID" activates
the decoder.
• Position S: the 'special function' button "SPEC" of all apartment stations (also those in parallel) of the
user in the column "Column ID" and user code "CODE" (the one used to acquire the event) activates the
12
decoder.
§
The position of special decoder dip-switches CODE is irrelevant for the operation with 'special function'
button.
EVENT: INTERCOM CALL FROM APARTMENT STATION
• Assign to the special decoder a user code from 0 to 127 using dip-switches CODE; in the system special
decoders must not have the same user code as other devices (apartment stations or other decoders),
even if belonging to different columns.
§
To set the desired code use dip-switches CODE from 2 to 8 (2=most signifi cant bit – 8=least signifi cant
bit); the dip-switch 1 must be OFF.
• Program the buttons of concerned apartment stations to perform a direct intercom call to the previously
confi gured special decoder:
§
The following description concerns programming procedure of an intercom call with Signo video door
phone: for other models, see booklets provided with apartment stations.
– Go to the apartment station to be programmed.
– Keep the door lock release button and pick the handset up. The apartment station emits a tone to
indicate the access to programming mode.
– Press the button to be programmed; the apartment station emits a confi rmation tone.
– Go to the special decoder and press the programming button until the red led turns on, then release
the button.
– The apartment station in programming mode emits a beep to confi rm the programming.
– Press again the programming button of the special decoder until the red led turns off.
– Hang up the apartment station handset, that emits a beep to confi rm the exit from programming
mode.
• Program the event by pressing the intercom call button of an apartment station that must activate the
special decoder relay (see paragraph concerning events programming).
Assume that this apartment station is in the column number "Column ID" and has a user code "CODE".
DS1083-019A DS1083-019A
2
1
3
13