Basic Instructions - TAKATA I-SIZE BASE PLUS Manual De Instrucciones

[I-SIZE_BASE_004] Using or disassembling the
TAKATA MIDI I-SIZE (PLUS) in any way other than
described in these instructions can cause serious
injury. Do not remove any components or replace
them with parts that have not been approved by
TAKATA AG.
[I-SIZE_BASE_005] After an accident, replace the
TAKATA MINI I-SIZE or TAKATA MIDI I-SIZE
(PLUS) seat and the TAKATA I-SIZE BASE (PLUS)
with a new TAKATA MINI I-SIZE or TAKATA MIDI
I-SIZE (PLUS) seat and a new TAKATA I-SIZE
BASE (PLUS). Accidents can cause damage to the
TAKATA MINI I-SIZE or TAKATA MIDI I-SIZE
(PLUS) seat and the TAKATA I-SIZE BASE (PLUS)
that may not be visible to the naked eye. Failure to
observe this notice may seriously risk your child's
safety in the event of an accident.
[I-SIZE_BASE_006] The TAKATA I-SIZE BASE (PLUS)
can heat up when placed in direct sunlight. To prevent
burns, ensure that an adult checks all plastic and metal
parts of the TAKATA I-SIZE BASE (PLUS) before use.
[I-SIZE_BASE_007] Position the TAKATA I-SIZE
BASE (PLUS) so that static parts (plastic elements,
etc.) do not get stuck in vehicle doors during normal
use of the vehicle.
[I-SIZE_BASE_008] Do not leave any sharp, pointy
or heavy objects around the vehicle. In the case of an
accident, these objects may fl y around the cabin,
injuring children or other passengers. Luggage and
other potentially dangerous items should also be
secured in place.
Never leave the TAKATA I-SIZE BASE (PLUS) with
your child in the TAKATA MINI I-SIZE or TAKATA
MIDI I-SIZE (PLUS) (whether attended or not) on a
raised, slanted or uneven surface, such as a table, a
baby-changing table, steps or a ramp.
NOTE!
The TAKATA I-SIZE BASE (PLUS) should not be
used for any more than six years after purchase.
Plastics deteriorate generally over time, particularly
when exposed to direct sunlight. This deterioration is
not always visible to the naked eye, and can
compromise the performance of the TAKATA I-SIZE
BASE (PLUS).
Should you have any other queries as to the use of this
product, please contact TAKATA customer services
(see Section 8 – Service).

3. BASIC INSTRUCTIONS

CAUTION!
Always place the TAKATA I-SIZE BASE (PLUS) on
a fl at, stable surface.
CAUTION!
Be careful that your fi ngers and other body parts do
not get caught in any moving sections of the seat.
Adjusting the support leg
Step 1 – Fold out the support leg
[I-SIZE_BASE_009 + I-SIZE_BASE_010] Take hold
of the support leg on the underside of the TAKATA
I-SIZE BASE (PLUS). Push the release slider of the
folding mechanism to the side, pull the support leg out
of the transportation position, and swing it out as far
as it will go. When it reaches full extension, the
support leg is locked into place by a spring in the
release slider.
Step 2 – Unlock and adjust the support leg
[I-SIZE_BASE_011] Press the button on the height
adjustment mechanism as far in as possible, and slide
the support leg up or down. When the desired position
is reached, release the button and check that the
support leg is locked in place. This is indicated by a
click, and a green marking on the top of the button.
WARNING!
If the support leg is not set at the correct height, there
is a risk of serious injury to the child or other
passengers in the case of an accident.
[I-SIZE_BASE_022] The correct position of the
support leg is set when the support leg of the TAKATA
I-SIZE BASE (PLUS) lies completely and fl ush
against the vehicle fl oor, and the indicator at the lower
end of the support leg is fully showing a green
marking.
Step 3 – Fold in and lock the support leg
[I-SIZE_BASE_009] To be able to fold in the support
leg, you must fi rst position it in the smallest height
setting. Push the release slider of the folding
mechanism to the side, and swing the support leg
towards the underside of the base. When the support
leg lies snug against the underside of the TAKATA
I-SIZE BASE (PLUS), the support leg is locked into
place by a spring in the release slider.
de
en en
fr
it
es
pt
nl
17