Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Problem
The sensor fields become hot.
comes on.
comes on.
comes on.
and a number come on.
comes on.
E6 comes on.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
Possible cause
The cookware is too large or
you put it too near to the con-
trols.
Automatic Switch Off oper-
ates.
The Child Safety Device or the
Lock function operates.
There is no cookware on the
zone.
The cookware is incorrect.
The diameter of the bottom of
the cookware is too small for
the zone.
There is an error in the hob.
There is an error in the hob be-
cause a cookware boiled dry.
Automatic Switch Off and the
overheating protection for the
zones operate.
The second phase of the pow-
er supply is missing.
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
Remedy
Put large cookware on the rear
zones if possible.
Deactivate the hob and acti-
vate it again.
Refer to "Daily use" chapter.
Put cookware on the zone.
Use the correct cookware.
Refer to "Hints and tips" chap-
ter.
Use cookware with correct di-
mensions.
Refer to "Technical data"
chapter.
Disconnect the hob from the
electrical supply for some time.
Disconnect the fuse from the
electrical system of the house.
Connect it again. If
on again, speak to an Author-
ised Service Centre.
Deactivate the hob. Remove
the hot cookware. After ap-
proximately 30 seconds, acti-
vate the zone again. If the
cookware was the problem,
the error message goes out.
Residual heat indicator can
stay on. Let the cookware be-
come sufficiently cool. Check if
your cookware is compatible
with the hob.
Refer to "Hints and tips" chap-
ter.
Check if the hob is correctly
connected to the electrical
supply. Remove the fuse, wait
one minute, and insert the fuse
again.
comes
15
Tabla de contenido
