Kohler K-6330 Guia De Instalacion página 6

Spray
Hose
7. Install the Spray Hose
- Temporarily cover the sprayhead with clean packing wrap to protect
it from damage.
- Insert the spray hose into the spout.
- Fit the gasket into the valve outlet, and thread the spray hose to the
valve outlet.
- Hold the valve outlet with a wrench, and securely wrench tighten
the spray hose. Do not overtighten.
- Remove the packing wrap from the sprayhead.
- Turn on the water and check for leaks.
- Water should slowly flow from the sprayhead. Slowly squeeze the
spray control, and the water flow should increase. Squeeze the
control all the way, and the water flow should stop.
- Turn off the water.
A
1025493-2-
Spout
Sprayhead
Valve
Outlet
Gasket
Channel
6
Kohler Co.