HURAKAN HKN-22S Manual De Instrucciones página 12

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
EN
2 TECHNICAL SPECIFICATIONS
Model
Voltage
Power
Grate openings
Maximum performance
Overall dimensions, mm
3 INSTALLATION OF THE DEVICE
3.1 WORKING SURFACE
3.1.1 The working surface, on which the meat mincer is installed, shall be in accordance
with the device dimensions. The working surface shall be flat and dry, on the height of
80 mm from the ground; its temperature shall be between 5-35 ºС.
3.1.2 The power cable shall be effectively grounded.
3.2 DEVICE FUNCTIONAL CHECK
In order to make sure that the device is properly operating, do the following:
● Switch the meat mincer on and make sure that the spiral conveyor is rotating
counterclockwise in relation to the mincer opening;
● Press the "off" button, the device will stop;
● If the device stopped automatically, press the "turn over" button and make sure
that the spiral conveyor is changing the direction and rotating clockwise.
4 USE OF THE DEVICE
4.1 CONTROL PANEL
Figure 2.
12
HKN-22S UNGER
220 V/50 Hz
1100 W
10 mm/6 mm/5 mm
300 kg/h
520×220×445
Tabla de contenido
loading

Tabla de contenido