Elnapress 450Se; Safety Features - Elnapress 250S Manual De Instrucciones

TURN ON ELNAPRESS AND
ADJUST TEMPERATURE

ELNAPRESS 450SE

Slightly press the ON button with the press open.
A red light will illuminate.
At the same time the icon will light up green:
Select the desired ironing program by pressing the + button several times.
Elnapress 450SE is able to manage two different temperature modes:
1. Manual in nylon, silk, wool mode
2. Using the new "Optimal Temperature" function. The function is activated
automatically when "cotton" mode is selected.
The two icons will light up simultaneously:
Cotton - Optimal Temperature.
The function allows you to be able to iron garments of different composition without
having to worry about the temperature regulation. For some newly designed fabrics,
such as garments that use chemical fibers, we recommend doing an ironing test
(lowering and raising the pressure lever quickly) in a small area, ensuring that
the temperature cannot damage your garment. If the garment tends to rise from
the ironing board, we recommend entering manual mode by selecting a more
appropriate program (always check the temperatures indicated on the label of your
garment). When the right temperature is reached, the red light will switch off.
To switch off the press, repeatedly press the off button until you switch off all the
lights/bright icons.
N.B: If the press is closed, the temperature can only be lowered.
IRONING TEMPERATURES
Before ironing the garment, check that
the symbols on its label correspond to the
temperature adjustment mode.
16 16
cotton -
nylon - silk wool
optimal temp.

SAFETY FEATURES

All models are equipped with a blocking mechanism ensuring a safe transport.
INSTRUCTIONS FOR ALL MODELS
If by lack of attention the press should remain closed for more than ten
seconds, a double electronic safety system will trigger an acoustic signal
"beep-beep" which will interrupt the electrical circuit and will be reactivated
automatically by re-opening the press.
ELNAPRESS 250S / 250SE / 450SE
If Elnapress is left on when it is open and not used for 15 minutes, the
electric current is switched and the press will automatically be turned off
by sending a sound "beep-beep" signal. To reactivate it, press the power
button.
ELNAPRESS 450SE
At each automatic or manual switch-off, the software checks all its functions.
If after 45 min the temperature is still = /> 65°, the safety system will block all
the functionalities to safeguard your product and the environment where you
are ironing. The display will light up again and warn you by sending a sound
"beep beep" signal
The system can NOT be restored and reset by simply switching off (Off button)
your ironing press.
Once you have noticed the anomaly, please follow the instructions below:
1. Switch off the press with the appropriate button (see switch-off instructions)
2. Disconnect the cable from the product (if it is still connected)
Contact an Elnapress authorized service center (refer to our website
www.elnapress.com ).
17