Description Of The Appliance And Accessories; Preparations; Use - Imetec ZEROCALC PRO 2300 Instrucciones Para El Uso

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer the illustrative guide on page I to check your appliance's equipment.
1. Plate temperature LED
2. Temperature adjustment knob
3. Spray button
4. Super-steam button
5. Steam selector
6. Water fill-up opening
7. Spray
Sort the laundry according to the international symbols shown on the label; if this is missing,
sort according to the type of material.
Start to iron the garments that require a lower temperature so as to reduce idle time (the iron
requires less time to warm up than to cool down) and eliminate the risk of burning the fabric.
WARNING! The iron must not be used if it is has been
dropped, if there is visible damage or if it leaks water.
WARNING: TYPE OF WATER TO BE USED
Use only:
• demineralised water for iron.
WARNING! Do not pour diluting agents, scented liquids
or descaling agents into the reservoir as the use of these
substances can damage the product.
WARNING! Do not use water from dryers, air conditioners,
water from tumble dryers, filtered water with water softeners
and rain water.
The reservoir may contain some water as each product is tested before being put on the
market.
Verify that the plug (13) is disconnected from the socket.
Set the steam selector (5) to 0 [Fig. B].
8. Calc clean button
9. Max fill-up level
10. Plate with steam holes
11. Water reservoir
12. Technical data
13. Plug
14. Water cup
PREPARATION

USE

Max
13
EN