Troubleshooting - Kamikaze KVS 2000 Manual De Uso

ELECTRONIC SAW

20. TROUBLESHOOTING

Make sure that the tool is repaired only by qualified people from our service
centers, using only original parts as spare parts.
This will ensure the life and the safety of the tool.
Problem
Low battery
La chainsaw
does not
Battery disconnected
work
Switch malfunction
Loose internal connections
Intermittent
operation
Switch malfunction
Ruined chain
Chain
Poor lubrication
heated
Damaged bar
There is no lubrication, resulting in
excessive friction
Ruined chain
Bad cutting
surface
The cut result is poor
The battery is not fully charged
The battery is not inserted
correctly in the battery charger
connector
It does not
charge. Red The charger is not properly
connected to the power socket
light of the
charger
Dirty battery poles
flashes
Damaged battery
Damaged Battery charger
Possible cause
97
www.kamikazevolpi.com
Corrective action
Charge the battery
Connect the battery
Send to the service center
Send to the service center
Replace the chain
Check the lubrication
Replace the bar
Check the lubrication
Replace the chain
Read carefully the user's
manual
Charge the battery
Insert the connector
correctly
Connect it properly
Clean the poles
Replace the battery
Replace the battery charger