Safety Considerations; Technical Data - Dustcontrol DC AirCube 1200 Manual Original

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precautions should always be followed to reduce the risk
of fi re, electric shock and personal injury, including the
following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it in
damp or wet locations or in presence of fl ammable
liquids or gases.
2. Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the material you
are working with. Don´t use the machine for purpo-
ses that it isn´t intended for.
3. Don´t abuse cord
Never pull the machine by the cord. Keep the cord
from heat and sharp edges. Check the electric cable
regularly for damage.

TECHNICAL DATA

HxWxL
Weight
In-/Outlet
Flow, at open outlet
Power consumption
Degree of separation,
EN 60335-2-69, class H
EN 1822-1
Pre-fi lter "cartridge"
Area pre-fi lter and HEPA fi lter
Soundlevel
4. Important measure
With cleaning and maintenance on the machine, the
power cable should be disconnected from the supply.
Only use the machine complete.
5. Maintain the machine with care
Keep the machine clean and check that the hose
(extra accessories) is undamaged and that all gaskets
are tight. Follow instructions. Keep handles dry and
free from oil and grease. Make sure the micro-fi lter is
fi tted properly.
6. Checking for damage
Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If
there are any damaged parts these should be repaired
by a Dustcontrol authorized service center.
7. Warning
Use only accessories and replacable parts which are
available in the Dustcontrol catalogue. When using
faulty parts or pirate parts (especially fi lter) the
machine could leak out unhealthy dust which can
cause personal injuries.
Th e machine is not designed to be lifted
by the handle of a crane or other lifting
device.
DC AirCube 1200
869 x 458 x 598 mm
21 kg
∅ 250/315 mm
1060 m /h 50 Hz, 860 m /h 60 Hz 1850 m
3 3
230 V, 385 W, 115 V, 195 W
99.995 %
HEPA 13
G3
0.45/4.9 (m )
2
max 60 - 69 dB(A))
DC AirCube 1200, 2000 - 9
DC AirCube 2000
1019 x 512 x 547 mm
25 kg
∅ 315 mm
/h 50 Hz, 1650 m /h 60 Hz
3 3
230 V, 505 W, 115 V, 350 W
99.995 %
HEPA 13
G3
0.63/8.2 (m )
2
max 62 - 74 dB(A)
Part No 42943