Installation Procedures - Sanyo FXCD-1100 Instrucciones De Operación

3. INSTALLATION PROCEDURES

1) Installation with Mounting Kit
M514
M58
REAR STRAP
(BRACE)
MOUNTING BRACKET
(HALF SLEEVE)
MOUNTING GROMMET
MOUNTING SCREW
MOUNTING BRACKET
(HALF SLEEVE)
1. Insert the mounting bracket into the DIN-standard cutout (182  53 mm) in the dashboard or console.
2. Bend the mounting bracket stopper outward until the bracket fits snugly in the cutout.
- If the rear strap is used:
3. Push the unit into the mounting bracket until it locks in place.
4. Secure the rear strap to the audio unit and vehicle dashboard.
- If the mounting screw is used.
3. Install the supplied mounting screw (M5) in the audio unit.
Cover the mounting screw with the supplied mounting grommet.
4. Push the unit into the mounting bracket until it locks in place.
DASHBOARD
OR CONSOLE
AUDIO UNIT
DASHBOARD
OR CONSOLE
AUDIO UNIT
- 24 -
REMOVABLE
TRIM RING
REMOVABLE TRIM
RING