Error Signs - Sanyo FXCD-1100 Instrucciones De Operación

ERROR SIGNS

CD Player
If a problem should occur while operating the built in CD player, one of the following error signs
may be displayed:
Error Sign
E01 Abnormal mechanism function.
E07 The disc is inserted incorrectly.
The disc is dirty.
The disc is defective.
There is condensation on the optical
lens.
E99 Internal connection check error.
CD Changer
If a problem should occur while operating the connected CD changer, one of the following error
signs may be displayed.
Error Sign
E01 Abnormal mechanism function.
E07 The disc was inserted incorrectly.
The disc is dirty.
The disc is defective.
There is condensation on the optical
lens.
E30 Excessive temperature has been de
tected in the vehicle.
The magazine is not fully inserted into
blinking g
the changer. the changer
No discs in the magazine.
Cause
Press the eject button.
Turn the power off and then on again.
If it is not corrected, contact the place
of purchase.
Eject the disc and insert it properly.
Clean the disc.
Use another disc.
Leave the disc player off for an hour
or so, then try again.
Turn the power off and then on again.
If it is not corrected, contact the place
of purchase.
Cause
Contact the place of purchase.
Insert the disc properly.
Clean the disc.
Use another disc.
Leave the disc player off for an hour
or so, then try again.
Refer to the instructions supplied with
the CD changer.
Allow the car to cool.
Completely insert the magazine into
the changer until it clicks into place. the changer until it clicks into place
Load discs into the magazine.
- 18 -
Remedy
Remedy