Listening To The Radio - Sharp XL-UH240W Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Listening to the radio

ON/
STAND-BY
TUNER
(BAND)
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
or
) button on the remote control
to tune in to the desired station.
Manual tuning:
Press the TUNING (
or
) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING (
or
) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner
will stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to
monaural, and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
03/12/17
XL-UH240W 17-25.fm
XL-UH240W
ENGLISH
or
) button
E-24

Capítulos

Tabla de contenido
loading

Tabla de contenido