To Remove Usb Memory Device - Sharp XL-UH240W Manual De Instrucciones

3
Select desired file to be played back by pressing the
or button. Proceed to step 5.
4
Select desired file to be played back by pressing the
or button. (Folder mode off)
5
Press the / (USB / ) button.
Playback will start and the file name will be displayed.
Title, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY
button.
TITLE-1 Indicator
File Name Display
TITLE-2 Indicator
Function Display
( 2)
TITLE-3 Indicator
Clock Display
( 1) MP3 ID3-Tag only supports version 1.x.
( 2) Only appears when clock is already set.
Note:
To pause playback:
Press the CD/USB button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the stand-
by mode after 15 minutes of inactivity.

To remove USB memory device

1
Press the USB
"UNPLUG OK" appears on FL display.
2
Disconnect USB memory device from the USB terminal.
Title Display
Notes:
( 1)
SHARP will not be held liable for the loss of data whilst the USB
Artist Display
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
when connected to the USB terminal.
This USB memory's format supports FAT16 or FAT32.
( 1)
Album Display
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
If "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
In case the data inside the USB memory is large, it may take
longer time for data to be read.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
03/12/17 XL-UH240W 17-25.fm
button on remote control. Wait until
XL-UH240W
ENGLISH
E-22