Intended Use - Worx WG707E Traducción De Las Instrucciones Originales

INTENDED USE

This product is intended for domestic lawn
mowing.
ASSEMBLy
ImPORTANT! Before you assemble
the lawn mower, check the accessories
according above information, make sure the
accessories are completed.
1. FITTING ThE hANDLE (See Fig. A1-
A5)
1) Remove the screws (X 2)(a) on the both
side of deck. (See Fig. A1)
2) Insert the Lower Handle (8) into the holes
on the deck provided.( See Fig. A2)
3) Secure with the screws provided.( See Fig. A2)
4) Attach the Upper Handle (6) with the
bolts and Lock Cam Lever (7) to the Lower
Handle. (See Fig. A3)
5) Tightening the two Lock cam levers. Check
that the handle is FULLY secured.
The cam lever pressure can be adjusted by
adjusting the lock cam lever (7) clockwise/
counter-clockwise. DO NOT OVER
10 10
TIGhTEN. ( See Fig. A4)
NOTE: Ensure the bolts are fully inserted
through the handles before fitting the handle
knobs.
6) Attach the Cable Clips (2) provided, to the
upper and lower handle. Insert the cable
into the clips ensuring there is enough
cable slack. (See Fig. A5)
2. GRASS COLLECTION bAG ASSEmbLy
Connect the grass box handle to the box top
as shown in F ig B1-B4.
Step 1. Press the front of the handle briefly.
(See Fig. B2)
Step 2. Then push it forward. (See Fig. B2)
Step 3. Push down the back of the handle.
(See Fig. B2)
Step 4. Finally, clip the plastic clips over the
metal frame. (See Fig. B3)
wARNING: Don't fit the handle in
reversed direction. Fit the handle as
shown in Fig b1.
Electric lawn mower
3. GRASS COLLECTION bAG FITTING
(See Fig. C1, C2, C3)
1) Switch off the mower and Unplug from
the mains—Wait for the blade to come to a
complete STOP .
2) Raise the Safety Flap (9) and hold it up,
ensure that the Mulching Plug(12) has been
removed.
3) Pick up the Grass Collection Bag by the
handle, and position the Grass Collection
Bag on the lower hooks (a) on the mower
deck (See Fig. C2).
4) Release the safety guard to lock the
grass bag into position. Ensure the Grass
Collection Bag is installed securely (See
Fig. C3).
NOTE: Depress the grass bag slightly to
ensure that it is completely installed.
4. REmOVING/EmPTyING
Hold the Grass Collection Bag, lift the Safety
Flap (9) and hold up. Remove the Grass
Collection Bag.
wARNING: Always check the safety
flap can close the discharge outlet tightly
before using. Never lift the Safety Flap when
the lawn mower is being used without fitted
grass bag.
OPERATION
1. STARTING AND STOPPING (See Fig. D, E)
STARTING
Connect the plug to the mains and switch ON.
The switch box is provided with a lock-
off button to prevent accidental starting.
With one hand press and hold the Safety
Button (5), with the other hand squeeze the
Switch Lever (1) towards the handle, and release
the Safety Button. The machine is now started;
wait until the product is at full speed before
cutting the grass. Then use both your hands to
hold the Switch Lever to keep it running.
STOPPING
Release the Switch Lever.
2. hOw TO mOw
For cutting convenience, it may be best to start
mowing at a point close to the power supply
and to work your way away from the supply.
EN