Tabla de contenido
EN
• Prior to switching the appliance on, make sure the lid is closed properly. To avoid scalding, do not open the
lid during heating.
• We do not recommend using the kettle for heating liquids other than water.
• Do not switch the unit on without water. If an empty kettle is turned on, the safety fuse will deactivate it
automatically. Let the kettle cool, then fill it with cold water and you may use it again.
• Extra care should be taken while opening the lid when refilling the hot kettle with water.
• Take precautions to avoid scalding with hot water while handling the kettle. Always hold the kettle by the
handle, as the vessel can be hot and may burn you.
• Pour the hot water slowly – excessive tilting may cause the water to flow through the lid – RISK OF
SCALDING!
• Do not use abrasive or chemically aggressive substances to clean the appliance.
• Do not use the unit if it does not operate properly, or if it has been dropped, damaged or exposed to any
liquids. Have the appliance tested and repaired by an authorised service centre.
• Never use the appliance if the supply cable or plug has been damaged; have the defect repaired immedi-
ately by an authorised service centre.
• The appliance is not designed for outdoor use.
• The appliance is intended for household use only, not for commercial use.
• Do not immerse the supply cable, the plug, or the appliance itself in water or any other liquid.
• Never repair the appliance yourself. Instead, contact an authorised service centre for repair.
• This appliance may be used by children 8 years of age and older and by persons with physical or mental
impairments or by inexperienced persons if they are properly supervised or have been informed about
how to use of the product in a safe manner and understand the potential dangers. Children must not play
with the appliance. This appliance may be cleaned by children 8 years of age and older if they are properly
supervised. Keep this appliance and the power cord out of reach of children younger than 8 years of age.
Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.
1.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliances by a person responsible for their safety.
2.
Children should be supervised to ensure that they do not play with the appliance.
1
PRODUCT
DESCRIPTION
1.
Lid
2
2.
Kettle body
3.
Water mark
4.
Button to open the lid
5.
Handle
6.
Switch with power indicator
7.
Supply cable base
7
24
CAUTION
Prior to first use, we recommend boiling the maximum volume of water in the kettle at least 3 times, then
pouring it out. The kettle is then ready for operation.
The kettle may only be used with the supplied base.
OPERATING INSTRUCTIONS
1.
Remove the kettle from the base (7), press the button for opening the lid (4), open the lid (1), and fill the
appliance with cold water within the permitted maximum only. If the water level in the kettle is under
the recommended minimum, the kettle will keep overheating and turning off prematurely.
Note: Make sure that the lid (1) is closed properly, otherwise the kettle can not turn off automatically
2.
Place the kettle on the base (7); electric contacts will get connected automatically. Thanks to the central
connector design, the kettle can turn around 360° and be put on the base from any side.
3.
Connect the base to the mains.
4.
Turn the kettle on by pressing the switch (6).
A control light on the switch (6) signals the kettle is in operation. The kettle lid (1) must be properly
closed when water is being heated.
WARNING!
Do not open the lid during heating or immediately after heating is completed. Hot steam could scald
you!
5.
After the boiling point has been reached, the kettle will turn off automatically, and the operating light
will go out. Water heating can be terminated prematurely by moving the switch (6) to the off position.
6.
Remove the kettle from the base (7) and use the hot water.
7.
If you want to reheat the water you have just finished boiling, wait for approximately 30 seconds before
reactivating the switch (6).
Note: It is not a sign of a defect when a small amount of water droplets appear on the kettle base (7). It is
a small amount of condensed steam, which deactivates the kettle thermostat.
CLEANING AND MAINTENANCE
4
WARNING!
Always disconnect the power supply cable from the mains outlet before cleaning
the appliance.
Make sure the appliance has cooled down before handling it.
Only use a wet cloth for cleaning the surface; never use detergents or hard objects,
3
as they may damage it.
Never clean the unit under running water; do not rinse it or submerge in
5
water.
Limescale removal
Impurities from water build up during normal use. These sediments can be removed perfectly from the kettle
using preparations designed for removing limescale (observe the producer's instructions) or using the follow-
ing procedure:
6
1.
Pour 0.5 litre of vinegar into the kettle and top up with water. Leave the solution in the kettle overnight.
Do not boil!
RK234x
RK234x
EN
25
Tabla de contenido
