Conceptronic CPNP200P Guía De Instalación Rápida página 30

ENGLISH
3. Connecting the Powerplug Starter-Set
The Powerplug Starter-Set can be used to connect 2 or more computers with each-other
or connect 1 or more computers to a xDSL/Cable modem/router without creating a new
network. The electrical circuit in your home will work as a network and transfers your
data to and from your connected computers.
You can connect the Powerplug Starter-Set as described in the following examples, or
create your own setup.
Note: The use of a power-extension cord or power strip is not recommended. This will
decrease the link-quality of the Powerplug network. Connect the Powerplug
Adapters directly to your wall outlet.
When the Powerplug Adapters are connected to the electrical circuit, the Link-LED on
the devices will burn. The Link-LED indicates that the Powerplug Adapters are
connected with each-other.
The Powerplug network works like a "Bridge". If your router is providing IP Addresses to
your network devices through DHCP, the connected PC will receive an IP Address from
the router through the Powerplug "Bridge" connection.
Connecting the Powerplug requires only 3 simple steps:
1. Connect the supplied network cable between the Powerplug and your PC.
2. Insert the Powerplug in a free wall-outlet
3. Power on your computer.
30