-
This machine is intended for professional bakers ;
-
This machine is solely intended for cutting temperate baked bread ;
-
It may only be used by one person at a time. (unless otherwise stated) ;
-
Don't allow children or unauthorised persons to use or manipulate the machine ;
-
It has to be kept and used inside in a location, away from humidity and heat ;
-
The machine has to be adequately lit for carrying out the work satisfactorily ;
-
Don't clean the equipment with water ;
-
This machine has a noise level below 75 dB(A) as per standard EN ISO 3744.
-
Before connecting your machine to the electricity network, check that the machine oper-
ation voltage (see rating plate on the machine) and voltage of the electricity network
are appropriate ;
-
Connection of the machine has to be made using an earthed plug ;
-
Your electrical installation supplying the machine has to be protected as below :
-
North America : Main protection 15A ;
-
Rest of the world : Main protection 16 A.
Note : All other problems resulting from another type of connection will not be taken into
account.
-
If necessary fix the feet or casters (if with stand) delivered with the machine ;
-
Please refer to the "Instructions" section for using the machine;
-
In case of danger for the user or the machine, use the main switch to cut the supply and/
or remove the plug;
-
Remove the electric plug and wait that the blade are completely stop before every
maintenance and service operation ;
-
The blade continue to turn until 2 minutes after switch off the
-
Don't touch the blade even when stopped ;
-
If you need to change the blade, have this done by your authorised distributor ;
-
Make sure that you wear anti-cut protective gloves when replacing the cutters or carry-
ing out operations in the vicinity of the blades ;
-
All maintenance or part changing operations are to be carried out by a qualified person ;
CAUTION
CONNECTION
START-UP
DANGER
6
supply;